Groundbreaking aerosol drug delivery
Aerogen Solo delivers more effective and controlled treatment, lowering risk of exposure. The Aerogen Solo delivers more inhaled medication to the lungs⁴, in less time ⁵, with less residual volume,7 compared to jet nebulizers, giving confidence in a more effective and controlled treatment.
The medication reservoir is isolated from the breathing circuit which minimizes nebulization of contaminated fluids¹. The risk of exposure to bioaerosols is reduced because the need to open the circuit is eliminated⁸.
The Aerogen Solo delivers more effective medication throughout the hospital through mechanical ventilation and non-invasive support such as non-invasive ventilation (NIV), high flow therapies (HFNC) and spontaneously breathing patients¹⁻⁷.
The Aerogen Solo is uniquely designed remaining in place during ventilation⁸. This closed system requires minimal management and can be left inline reducing staff handling and workload⁷ ¹⁰. Easy to set up and virtually silent operation, with no added flow required⁷.
… 6x more medication for spontaneously breathing patients4 than a traditional jet nebulizer in six healthy subjects. Pulmonary aerosol deposition was increased with the Aerogen Solo as compared with the jet nebulizer (34.1 ± 6.0% versus 5.2 ± 1.1%, p < 0.001).4
The Aerogen Ultra in combination with the Aerogen Solo provides faster and improved patient response by delivering more medication, in less time compared to traditional nebulization¹⁰ ¹¹ ¹². The Aerogen Ultra has been shown to reduce the number of treatments required for symptom control⁴ ¹⁰ leading to higher discharge rates and lower admission rates, all compared to traditional jet nebulization⁴ ¹⁰ ¹⁹.
Compared to traditional jet nebulization, Aerogen delivers:
• More inhaled medication delivered to the lung in nearly half the time in a COPD model¹².
• 85% of patients achieve symptom control with one 2.5mg salbutamol dose¹⁰.
• 37-minute median reduction in ED length of stay¹⁰.
Aerogen is the only closed-circuit aerosol drug delivery system that mitigates the transmission of patient-generated infectious aerosol¹ ².
Aerogen effectively delivers inhalation medication² ³ ⁴. With 5x more medication delivered to the lungs¹⁴ compared to a jet nebulizer¹⁵ and higher inhaled mass in an adult mechanical ventilation model with Aerogen compared to pMDI¹⁶.
Aerogen is recommended for use by many of the world’s leading mechanical ventilation companies including Dräger, GE, Hamilton Medical, Maquet, Medtronic, and Philips.
¹² ¹² ¹²
¹⁰ ¹¹ ¹²³ ⁰⁴ ⁵ ⁶ ⁷ ⁸⁹
Multiple clinical studies have demonstrated that Aerogen improves clinical outcomes in both pediatric and adult patients decreasing admission rates⁴ ¹⁰, providing better and faster symptom.4 and bronchodilator response⁴ ⁵ ¹⁰, all compared to the traditional jet nebulizer⁶ ⁷ ¹¹ ¹⁹. Nearly⁴ times more medication delivered to the lungs via NIV and HFNC, compared to a jet nebulizer¹⁶ ¹⁷ ¹⁸.
To meet the needs of the patient’s treatment, the Aerogen Solo delivers inhaled medication easily integrated into multiple respiratory systems⁹ ¹⁴ ²¹. As a single patient use device, the Aerogen Solo can be used for up to 28 days⁹ across multiple therapies, delivering optimal lung deposition¹⁶ ¹⁷ ¹⁸.
Fewer treatments, faster discharge, decrease in admissions, improved outcomes, decreased admission rates for pediatric patients under emergency care compared to the jet nebulizer⁴ ¹⁹.
With control and consistency of treatment critical during ventilation, the Aerogen Solo maintains a closed ventilation circuit with a medication reservoir positioned above the circuit and the medication reservoir is isolated from the patient circuit⁹ which enables drug delivery without breaking the circuit and minimizes nebulization of contaminated fluids⁹ ¹³and the associated risk of de-recruitment of the lungs²².
Service is essential to keep medical equipment operational and safe. Our Nordic service team consists of experienced service technicians stationed across the Nordic countries. Our service technicians are ready to take on your every service need.”
A fresh breath of air
Pinnacle is a peak flow meter which measures the patient’s maximum speed of expiration, or peak expiratory flow rate (PEFR or PEF). The Pinnacle Peak Flow Meter helps asthma patients breathe more freely. Measuring both PEFR and PEF, it provides doctors with important insight into the severity and development of the condition, making it easier to prescribe adequate treatment. Made from medical grade polymers and stainless steel, the Pinnacle is a durable, reliable and easy-to-use device that is used worldwide to help give asthma patients a fresh breath of air.
Solution for continuous core temperature monitoring
The temperature variable is a key indicator of the patient’s febrile state. The continuous nature of the measurement is quite difficult to obtain and only a few restrictive devices (rectal, esophageal probes, etc.) allow continuous core temperature monitoring.
eCelsius Medical, class IIB medical device, is a miniaturized electronic ingestible capsule that transmits core temperature data continuously. The capsule communicates in real time with a dedicated monitor, e-Viewer Medical, at a sampling period of 30 seconds. This monitor allows data recording, and an alert may be triggered if a threshold has been exceeded. The communication distance between the capsule and the monitor ranges from 1 to 3m (depending on environment and patient).
The capsule also has its own memory. In the case of a communication disruption between the monitor and the capsule, an a posteriori automatic synchronization of the data is performed.
Insight Watch – Medical-Grade actigraphy monitoring, redefined
The compact and stylish CentrePoint Insight Watch captures and records continuous high-resolution raw acceleration data, sampled up to 256 Hz, to support the development of novel endpoints related to real-world activity, mobility, and sleep behaviors to provide objective, real-world physical activity, mobility, and sleep measures, in near real time.
Used in conjunction with the CentrePoint Data Hub or mobile application, captured data is passively transmitted to the cloud for near real-time detection of compliance issues and potential data trends.
Top-of-the-range activity monitor
The ActiGraph GT9X Link captures and records high resolution human activity information using a solid state 3-axis MEMS accelerometer and our proprietary filtering algorithm. The GT9X Link is our most sophisticated activity monitor and represents a significant upgrade from previous models. Building on our validated physical activity and sleep measurement platform, it has been redesigned with a rich set of new features along with multiple new channels of sensor data captured by gyroscope, magnetometer and secondary accelerometer. High resolution LCD screen, Bluetooth® for wireless data capture and uploads to ActiGraph’s mobile applications makes GTX9 Link the most versatile and user-friendly activity monitor in our range. It is fully backward compatible with previous device models to ensure data comparability for our existing clients.
Timik ApS
Sivlandvænget 27B, st. th.
5260 Odense S
Tel: +45 8230 6700
Org.nr 36089210
